Welcome to Exotic Wood Dash (tm) -- your source for wood dash kits, wood dashboards, wood trim, carbon fiber, and brushed aluminum dash accessories.
wood dash kits, wood dashboards, wood dashes, molded wood trim, carbon fiber, brushed aluminum dashboards, steering wheels, rocker panels, fender trim, rear wings, spoilers, shift knobs, chrome accessories, wood grain This is Exotic Wood Dash (tm) -- your source for wood dash kits, wood dashboards, wood trim, carbon fiber, and brushed aluminum dash accessories.  
Home Page of Exotic Wood Dash (tm) -- your source for wood dash kits, wood dashboards, wood trim, carbon fiber, and brushed aluminum dash accessories!
Installation Instructions for an Exotic Wood Dash ™ Kit


If you received a kit without a red backing please click here. 

Installing Wood Trim is easy.  Just remember these six easy steps for a professional installation:

·   Check fit and alignment

·   Clean surfaces thoroughly

·   Apply adhesion promoter

·   For large pieces, position and apply top half

·   Apply lower half.  Small pieces can be done at once

·   Press into position while gently warming
Step 1:

Carefully check the fit of each dash piece to assure proper fit and alignment of each part.

Make sure that this is the kit you want -- there is a 25% restocking charge on all returns. There will be no returns without prior authorization or after 30 days.  No cash refunds -- company credit only.

DO NOT REMOVE THE RED LINER BACKING AT THIS TIME!

If you received a kit without a red backing please click here. 

 - Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself!
. Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself! Step 2:

Use alcohol pad (enclosed with kit) to wipe surface clean.  THE SURFACE MUST BE PERFECTLY DRY, AND FREE OF ANY OILS OR CONTAMINANTS for the dash kit to adhere properly!
Step 3:

   Carefully apply adhesion promoter (enclosed) ONLY TO AREAS TO BE COVERED WITH DASH OVERLAY!  Allow to fully dry before proceeding.

 :Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself!
*Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself! Step 4:

For large pieces carefully reposition dash piece in place (see Step 1).  Carefully pull back top half and remove red liner.  Then starting at the middle and working towards the top, carefully press dash into position.  Proceed to Step 5.  For small pieces you can remove entire red liner, install and proceed to Step 6.

If you received a kit without a red backing please click here. 
Step 5:

Gently lift lower portion and remove the rest of the red liner backing.   Starting from the middle and working down, carefully press dash into place.

If you received a kit without a red backing please click here. 

 =Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself!
+Installing a wood dash kit or wood trim by Exotic Wood Dash (tm) is easy -- just follow these 6 easy steps! You can do it yourself! Step 6:

To complete installation. firmly press dash into position while gently warming with hair dryer.  DO NOT OVERHEAT DASH.

-------------------------------------
For questions or product information,
please contact mail@exoticwooddash.com.

Exotic Wood Dash™
16055 N Dial Blvd  # B15
Scottsdale  AZ  85260  USA
TOLL FREE 800-354-4449
or  480-607-2717
FAX 480-607-9050
   
This site designed and operated by psycheMatrix.
Technical questions about this site?
Contact the webmaster.