Tonneau Covers for Pickups
Not only do tonneau covers help make a pickup more
aerodynamic, they also provide a covered area for
storing items in the bed. Covercraft makes four
types of tonneau covers to fit both the needs and
budget of any pickup owner.
Low
Profile Rail System - Available in "Zip&GO!"
or traditional snap-style, this low profile tonneau
looks sharp and includes lots of features to make
it one of the best systems you can choose for
your truck.
Either version allows easy access anywhere around
the truck bed, and straps at the front of the
cover secure the rolled tonneau if full bed use
is needed.
Rail
System - Our most popular style, rail
system tonneaus use a full perimeter aluminum
frame that is clamped to the top of the bed (no
drilling, glue or screws). Covercraft's
rail system uses patented hidden fasteners to
hold the tonneau onto the rails.
Hook
& Loop - Budget priced hook &
loop tonneau covers are easy to install and available
in both our Ready-Fit® semi-custom design and
custom patterned to fit specific applications.
Low Profile Rail System Tonneau
Continuous Security Channel with Low Profile Styling
Covercraft's
low profile rail system tonneau can be ordered in
either a Zip&GO! style, which provides
a continuous full-bed seal, or a traditional "snap"
style with snap heads that are adjustable, to provide
a tighter fit when needed. Both styles of tonneau
covers use the same frame system and heavy-duty, non-shrink,
textured vinyl tonneau fabric. You can access
the bed from the front or the back with either style,
and the tailgate operates normally when the tonneau
is in place. The low-profile design looks great
on any pickup.
Full
perimeter anodized aluminum frame installs easily
without drilling, adhesives or tools.
Zip&GO!
tonneau features a durable Santoprene® extrusion
that is pressed into a security channel in the rails.
This creates a smooth, continuous seal around the
entire pickup. It's easy to operate in all
weather conditions, simply zip.....and go!
"Snap"
tonneau covers use a unique molded snap base that
slides into the rail security channels. The
snap base can be inserted two different ways to
help tension the tonneau, if required.
Both
tonneau covers use super stable vinyl coated woven
polyester/fiberglass for long life and minimal weather
shrinkage and expansion. This material is
a little more expensive, but in the long run well
worth it, as it holds it shape during summer heat
and winter cold.
Special
security strap allows tonneau to be secured to the
front rail and locked in place (lock not supplied).
Corners
feature a nylon "security tab" that fits into a
slot in the corner connector. This helps prevent
the corner of the cover from lifting.
Clamps
install easily without tools. The arched bows
aid rain run-off and rest on top of the clamps (except
Sportside & Flareside) for maximum support.
Tonneau
cover can be rolled up to the cab and secured with
straps (included) when full bed access is needed.
Rail
system and hardware is warranted to original owner
for the life of the vehicle, and the vinyl tonneau
cover is warranted against becoming unserviceable
for three (3) years.
Covercraft's
rail system tonneau design uses a full perimeter anodized
aluminum frame that mounts in about 30 minutes without
drilling, screws or adhesives. The tonneau covers
hidden fasteners are so unique they were awarded U.S.
Patent No. 5,553,652. They provide a smooth,
custom look and theft-resistant installation.
A special removal "key" is provided with each kit
to make removal easy and fast.
Easy
One-Person Installation - Requires only a 1/2"
or 9/16" wrench or socket. (Flareside and Stepside
models require additional tools.) Helps Increase Gas Mileage - By eliminating
wind drag in the bed of the pickup. Patented Hidden Fastener - Fits into rail -
no buttons or snaps to line up, just press in at any
location. Sewn in place over a 4 inch area to
reduce stress on the tonneau fabric. Custom Patterned - Designed to fit specific
applications. Choose from six (6) textured vinyl
colors. Lifetime Warranty - Based on normal use, on
anodized aluminum frame, bows, clamps and fasteners. Slip-Joint Corners - Allow easy removal of
back rail for loading bulky items in bed. Tailgate Opens Normally - No need to remove
tonneau for easy bed access. Saddle Bow-Ends - Securely snap in place over
clamps and aid in rain run off. One-Piece Side Rail Design - For easy installation
and strength (shown with an unsewn fastener). Durable Corner Pins - Secure the front and
rear rails and are easily removed for full bed access. Removal "Key" - Fits on key ring to allow easy
tonneau removal in any weather.
Vinyl
custom-fit and Ready-Fit® tonneau covers protect bed
contents and are a great value.
Self-adhesive,
press-on hook strips adhere firmly around the top
outer edge of the truck bed.
Cover
is one-piece construction using tough vinyl coated
polyester fabric.
Aluminum
mounting channel installed at the front of the bed
allows the tonneau to be easily removed or rolled
up and held in place with tie-straps (included).
Custom-fit
patterns have tailored, rounded corners.
Ready-Fit
series material color available - Black only
Custom-fit series material colors available - Black,
Gray, Tan
Continuous Security Channel with Low Profile Styling
